Wednesday, February 29, 2012

KGC 26-02-2012 BC-Machine is BACK~! Part 1

It's was a fine day on that morning~ But i wasn't planing to take mango down for my medical condition wasn't allow me to ride on mango's harsh suspension settings. So i went down KGC with my bro on my Touge-Ranger~
 As starting from last trip, i was kinda fond on stopping @ Bruas to take a brief stop for refreshment after driving for 1 and a quarter hours. It's does is a peaceful little town.
 And had some local delicious Kuih to fill up my half empty tank. Guess what, 2 Teh tarik, two pulut and two donuts only cost us RM 4~
 I love old school~ car's or bike. This one is decent looking new -old styled bike~ lol
 Finally, around 9am, Touge ranger was resting in the track. 
And i spotted 003's S2000~ in MATT which it's still yellow not long ago~  
 And the track had been properly set-up for car's going in and out of the track.
 And the car starts arriving just after i manage to take a breath~ 
And meeting some of my old BC-M friends~  
And car's which i had known for a few years~  
Waiting to register before getting in the track. 
 Two Camera Ryu~ wakakaka~ OWsome~!
As i spotted a few fresh man coming for the first time 
Litar Dato Sagor~ finally new management had put up some signboard. 
Registration in progress. Everything is key-ed in the laptop and printed the slip for all drivers. 
 BC-M's official logo~ 
First CR-Z i see~ sweet butt~  
 front is decently looking but i still like the back-side~ XD
we had a few fire-extinguisher in stan-by. 
And medical personal from local hospital was standing by as well~
That's part one for now. Will post more pic tomorrow~ (^^,) till then~ 

cherrio~ 

Tuesday, February 7, 2012

Traction Bracket installed and test-ed~

Finally after 3 weeks of CNY hassle basle, i manage to squeeze out time to work on my mango this afternoon. First i did was install the traction bracket which already delivered to me before CNY. 
here's two comparison shot, right side i had installed the bracket, as you can see the traction arm is almost as low as my rear disc rotor. 
as the left side which i haven install, it's level with my caliper which is almost level with the chassis when the car is lowered.  
another angle of view~  left 
Right~  
from rear~ left 
right. As you can tell the different of the traction bar's angle. It's 60mm lowered from it's original position on the axle.

As i took it on a test run afterward, directly can tell the axle is not 'hopping' as it use to be when launching the car from stop position or kicking clutch @8000RPM from slow rolling start. And it's more predictable during sideway actions as well. Not as they said it's harder to slide the tail out with traction racket installed. 

Will send a few sample unit to my drifting friends to test out once the foundry start pumping out my production units for me. Will post more review later~ cherrio~ stay tuned. 


Friday, January 20, 2012

Happy Chinese Dragon New Year everyone~

Sorry, i wasn't free to post any updates to my R&D~ been busy with CNY stuff and all~ 
I will updates the latest news on my 'creation' as soon as i had time after CNY~ 

Happy holiday everyone~  Safe driving~

Friday, January 13, 2012

Solid pinion spacer~ (AKA crush sleeves)

Last week, my friend Arthur bring one of his AE86's axle 3rd member to me. And asking if i could help him fix it or not. For he had read that i had a few experience with my car's LSD/axle. And his was in really bad conditions. At first glance, the pinion and ring gear still in work-able condition which leave me to check out the crush sleeve's pre-tension on the pinion bearings. And the result~~ I was correct. The pinion gear is sitting loose in it's housing. which means a faulty crush sleeve we were looking here. 
After taking apart the 3rd member. i compare the crush sleeve with my 'reference' unit which i made with a new crush sleeve and lock the pinion bearing until 60lb/f.
And Arthur's crush sleeve was 2.6mm shorter, yaiks~ 
After discuss with Arthur, he agree that he will let me made a guinea pig out of him bt making him a Solid pinion spacer. 
that 's what i had made by boreing out the sleeve from a single piece of mild steel. 
the standard crush sleeve is 1.65mm thick with a weaken ring to let it actually 'crush' when it's under tremendous pressure.
And the one i made for Arthur is 3mm thick and no weak point. Now it's cleaned, installed and send back for Arthur to install and tell me the result in his next Taman Selat Drift day~

So~ you may asking y went through all the hustle doing this??? 

This is the explanation i copy from a famous axle specialist in US call-ed Weir Performance.

"What these parts do when correctly installed is set the distance between the inner and outer pinion bearings (bearing preload). At the same time, these parts also locate the pinion gear relative to the ring gear within the casing. So, why does the crush sleeve fail? It fails because it is too weak to resist deflection when high pinion loads are applied. This is why we often hear people say, “my ring and pinion finally blew up”. The failure is not instantaneous as it would be if the gears were over-powered. The failure happens over time, due to repeated hard driving. High pinion loads deflect the pinion gear over and over until the o.e.m. crush sleeve becomes “loose” and cannot properly maintain the bearing preload. This also allows the position of the pinion gear within the casing to move causing misalignment of the ring and pinion gears. Over time, this leads to “howling” gears followed by “ground up” gear teeth and eventually destroys the gears. Protect your ring and pinion with one of our high strength steel solid pinion spacer kits."

Monday, January 9, 2012

AE86 rear Traction bracket~ Beta V1.0 trial production

Finally come back from KL. Really took some time off there and goes around to do some market survey. 

And while i'm away, the wider metal plate i ordered also had arrived. So, i took the material and the drawing and send it to my neighbor. 
And start milling out the desire piece to my bracket. 
 With their 5 horse power mean machine.
 That's carbite steel cutter he's using. slicing through the metal like tou-fu~ wow.
 received it after 5 hours of labour (>_<) that's 40bucks/hour. Do the maths.
 some slight alteration and on it goes. All the holes fit perfectly.
 And finally, it's welded together and a brief comparison with V0.09~ spot any different? 
 And give it a nice red coat to at least protect it from rust. 
All done and with *12.3 lb/in rated allen-key bolt with zinc coated nuts. It had 2 level setting which is 42mm offset and 64mm offsets.

I'll be making 10 sets in the first batch to test the respond. Any one interested can contact me via my contact link.

Saturday, December 24, 2011

AE86 rear Traction bracket prototyping~ V.09

When i was in KGC last week, some KE friends approached me and ask if i can made them something which catch-ed my interest. 
A traction bracket which installed under the axle where adjust the traction rod lower to point downward which will  help pushing the axle on the ground during acceleration. 

So after coming home and done some homework later~  i decided to made a prototype first to try on mango. And since i had a spare axle lying around. So i take it as my 'model' to fashion the brackets.
 After much consideration i decided to work it out from 6mm think of steel (which is the thickest metal i had in my factory) for it would take up a lot of stredd during hard cornering/drifting~
 Steps by steps measure out the holes on the axle and precisely drill the hole out to screw on to the axle.
final testing before weld them together with another piece of steel to add strength.  
Finally them become one~ i only use normal arc welding here for my MIG will only be coming in January next year~ so the final products will have stronger bond~ 
finally give my prototype V0.9 a bright RED coat to make it stand out from the dirty old axle~ :P lol~ 
Will do a test report later when i fix mango's axle, yet again~ 

stay tune~ chao~ 

Wednesday, December 21, 2011

KGC - 18-12-2011 Taj Collage Race event~ Part 2

After almost 4 hours of timing for race grid *super slow and time consuming for they only had one GPS unit. and the originally 3 laps running - warm-up lap, flying lap, and cool down lap; was cut short to 2 laps, only warm up lap and cool down lap. Which cause a few cars with weaker brake mod to almost ran out from the runway for we were force to make a U-turn at the entry of the S corners which is about 70M from the finishing line. 

At 3pm finally all the cars had line up for the first 1.3L class race~ 
 Han is warming up his KP's engine~ had to keep his foot on the throttler cause it's webber is running very rich~ lol
 And check out the front formula tires from those 1.6L FJ race car~ Love it's Michelin logo~    
 Another familiar face from the MME race this year~ Federal FZ-201 semi-slick tyre~ 
Sorry wasn't able to get a good shot on the 1.3L race, was trying out panning shot which almost all went south~ 
 And the big eyes catcher of the day~ Wawa~ brought to you by Chan Brother - Penang.
 The satria 1.3 and saga BLM were boogie-ing fast~ 
And han's KP were chasing it's heart out~  
A typical race day scene @ KGC, packed with viewers for free show~ 
And what had i said earlier..... han's KP heart were "out" oil temp went over the 150 mark and he had to retired early from the race. And a quick look at the engine, it wasn't looking good. The oil seal were leaking oil severely.    
 After that's it's the satria Neo class~ (with a BLM mix in) And there's a lady driver taking part as well~  
Where she were second last and maybe were pushing her car a littler over the edge, and we can see a lot of smokes came from her car in the last lap, when trying to run away from the last car. And from the amount of it,  i speculate that her car maybe get a blown gasket/broken con-road or piston or the all time famous broken cam pro Gen 1 crank shaft.
 And 2 corners later, she ramp into the tyre wall and stalled. Later we could see black smokes which we get when burning rubbers. And all the racers rush over to check her out.
And one of the driver bring her back to the grand stand. As where all the busy body surrounded the car to take a peek at the conditions of the driver. Which i wasn't really please with them was when the person who was giving first aid to her, (she was unconscious and had an asthma attack) shouting to the crowd to clear up and give her space and fresh air, the crowd still closing in to get a better shot with their cellphone camera.   
It was 15 minutes later and with kind-reminder from us, the organizer only to get the fire extinguisher from the circuit's office and rush to the burning car to try to put the fire out. 
 But it's was all too late for the neo. We could only look from a far where it burns to the ground. 

The fire engine only arrived 40 minutes later after the fire started. And the rain had start pouring down on us. I dun get to take any pictures for it's pouring hard and i was packing to go home cause it's already nearly 5pm. We still had a 2.5 hours drive home and a dinner stop to do. 

Reaching home after 3 hours of driving @ 9pm+ for mango's axle wasn't working as smoothly as it should be. Will took it apart again later to check what is the cause of it. 

Btw, just a small info for you all. They had accepted 112 cars into the race that day. (Where i purposely waited to be the last car to be inspected and numbered) which is way way above KGC's capacity. I can say me and a few of my friends agreed that we were comfort with 30~40 cars and a maximum number of 50 cars to take part in KGC's track day. 

Which this is surely the least organize track day i had been to KGC so far~ 

*Sorry if my words had offended anyone who is reading my post. But it's strictly my view only. Thanks for reading.